LINES WE REPRESENT / MIURA
Miura Industrial Steam Boilers, Sold and Serviced Across Northeast Ohio
A Miura fires from cold to full steam in about five minutes. That one fact reshapes how a plant runs its boiler room. Miura industrial steam boilers use a compact watertube design with a low water volume, so they build steam on demand instead of holding a large vessel hot around the clock. D. B. Johnsen Co. has sold and serviced Miura equipment across Northeast Ohio for years, and the point we make to a plant engineer in Cleveland or Canton is a plain one. You stop paying to keep water hot that you are not using.
Miura in Northeast Ohio: Sales, Parts, and Service From One Shop
Miura America builds its boilers in Rockmart, Georgia, and the engineering behind them points in one direction. Make steam when the load calls for it, and waste as little fuel and water as possible the rest of the time. That approach fits how most Ohio plants actually run, where demand swings through a shift instead of sitting flat. We represent the line here, quote it against your real load, and stand behind it after the truck leaves.
UPTIME
Built-In Redundancy That Keeps a Boiler Room in Steam
Reliability on a Miura comes from how the units are meant to be deployed. Instead of one large boiler carrying an entire plant, a bank of smaller modular units shares the load and fires in sequence as demand climbs. If one unit drops offline for service, the others keep the plant in steam. Onboard diagnostics flag a fault before it turns into a shutdown, which matters at two in the morning when the maintenance crew is thin. We have watched a single tripped unit stay a non-event on a modular setup that would have meant a cold plant on an older single-boiler layout.
SAFETY
Low Water Volume, and Why That Changes the Safety Picture
A conventional firetube boiler holds hundreds of gallons of superheated water under pressure. A Miura holds a small fraction of that. Less stored water means less stored energy, and that shifts the risk in a real way. Add automated controls, continuous monitoring, and low-water protection, and you get a boiler that behaves predictably even when a plant leans on it hard. Miura’s safety record across its installed base is a big part of why hospitals and food plants specify these boilers.
WARRANTY & MAINTENANCE
Miura’s Warranty and the Pressure Vessel Guarantee
Miura backs its equipment with a warranty that covers most parts and labor and, through the MMC and PVG programs, the pressure vessel itself against corrosion. That guarantee is not automatic. It depends on the boiler being maintained and inspected on schedule, which is where a local rep earns its keep. Our five factory-trained technicians handle the routine maintenance, the annual inspection prep, and the code work, including ASME R-Stamp repairs when a vessel needs certified welding. Keep the program current and the guarantee stays intact.
Request a QuotePRODUCT LINES
The Miura Product Lines We Quote
We represent three families of Miura industrial steam boilers, and the right fit comes down to your load, your fuel, and the room you have to work with.
LX Series
The LX is Miura’s compact, gas-fired modular watertube boiler. It carries ultra-low NOx ratings, runs a low water volume for fast heat transfer, and slides into boiler rooms that cannot spare much floor space. In older Akron and Cleveland facilities where the boiler room was sized for one large unit decades ago, the LX footprint is often what makes a modular retrofit possible at all.
EX Series
The EX is a versatile high-pressure steam boiler that runs on natural gas, propane, or number two fuel oil. Plants that need fuel flexibility, or that carry a heavier steam load, tend to land here.
Multiple Installation Systems
This is the modular idea taken to its logical end. Several units engineered to work as one, firing to match the load minute by minute. For a plant with swinging demand and tight floor space, it delivers uptime and efficiency a single boiler cannot reach.
Why Rent When Quick Ship Xpress Puts a New Miura Online Fast
When a boiler fails, the reflex is to call for a rental. Miura’s Quick Ship Xpress was built to change that math. The program ships a new boiler on a timeline that competes with getting a temporary rental delivered and fired, so instead of paying to rent while you wait, you can have your own unit running. One thing worth saying plainly: we are a manufacturer’s representative and a service shop, not an installer. We size the Miura, quote it, coordinate delivery and startup, and handle the minor piping around it. The physical installation runs through your mechanical or piping contractor, and we will talk to them directly while the job is being specified. Once it is running, service comes back to us.
Northeast Ohio Industries That Run on Miura Steam
Miura’s modular, on-demand approach suits the industries that keep this region working. We quote and support the line for:
- Food and beverage processing
- Breweries and distilleries
- Hospitals and healthcare facilities
- Colleges and university campuses
- Chemical processing
- Manufacturing plants
If a plant manager searches for a Miura boiler dealer near me, what they usually need is more than a price. It is someone who will size the unit correctly, get parts here fast, and pick up the phone when the boiler acts up. Parts ship UPS from our Richfield warehouse; there is a will-call window if you would rather grab it in person, and steam boiler service near me means our own trucks, running a roughly two-hour radius across nineteen counties.
MIURA FAQ
Frequently Asked Questions
How quickly does a Miura make steam from a cold start?
About five minutes. A Miura carries a low water volume, so there is not much water to heat before it starts producing steam. For a plant that shuts the boiler down over a weekend or between shifts, that cold-start speed is real money, because you are not firing all night just to be ready by morning.
We run one large boiler now. Why would we switch to a bank of smaller Miuras?
Two reasons, mostly. Redundancy and load matching. With a single boiler, one failure is a cold plant. With a modular bank, the other units carry the load while one is down for service. And because the units fire only as demand calls for them, you are not running a large boiler at part load all day, which is where a lot of fuel gets wasted.
What efficiency should we actually expect?
Miura publishes fuel-to-steam figures in the mid-80s on its watertube line, and the modular firing is what protects that number in the field. Your real result depends on your load profile, your feedwater, and how the system is set up, which is exactly the part we look at before we quote. A boiler that looks great on a spec sheet and runs badly on your water is not a win.
Does D. B. Johnsen install the boiler?
No. We are a manufacturer’s representative and a service shop, not an installer. We size the Miura, quote it, coordinate delivery and startup, and do the minor piping around it. The physical install runs through your mechanical or piping contractor, and we are glad to work directly with them while the job is being specified.
Will a Miura help us with emissions permitting in Ohio?
The LX series carries ultra-low NOx ratings, which is often what matters when you are working through an Ohio EPA permit or trying to stay under a threshold. We cannot promise how your specific permit lands, but we can tell you the numbers on the unit and put the documentation your engineer needs in front of you.
Can a Miura run on something other than natural gas?
Yes. The EX series runs on natural gas, propane, or number two fuel oil, so plants that need fuel flexibility or that do not have reliable gas service have a path. If dual fuel matters for your operation, tell us up front and we will size it around it.
A boiler just went down. How fast can we get a new Miura running instead of renting?
Faster than most people expect, through Miura’s Quick Ship Xpress program. It ships a new unit on a timeline that competes with getting a rental delivered and fired. So rather than paying rental fees while you wait for a permanent fix, in a lot of cases you can put your own boiler in. Call us and we will tell you honestly whether that works for your situation or whether a rental still makes more sense.
After it is running, do we have to service it through you?
You do not have to, but there is a good reason to. Miura’s pressure vessel guarantee under the MMC and PVG programs depends on the boiler being maintained and inspected on schedule. Our five factory-trained technicians handle that maintenance, the inspection prep, and code work like ASME R-Stamp welding, and we run 24-hour emergency service across Northeast Ohio with parts shipping UPS from our Richfield shop. Keeping service local is usually what keeps the guarantee intact and the downtime short.
Talk to D. B. Johnsen Co. About a Miura for Your Plant
We have sold and serviced boilers from the same corner of Northeast Ohio since 1958. If you are weighing a Miura for a new plant, a retrofit, or a straight replacement, tell us what the boiler feeds, the load you carry, and the fuel you have available, and we will size it properly.
Call (330) 659-9295 or email [email protected]. The office in Richfield is open Monday through Friday, 8:00am – 5:00pm, and the same number forwards after hours because boilers do not fail on schedule. Twenty-four-hour emergency service, every day of the year.